Sydney, New South Wales
Pressure equipment inspection in Sydney
In-service inspection to AS/NZS 3788 for Sydney and NSW, with a complimentary 3D model of the asset. Serviced Australia-wide by arrangement.
In New South Wales, hazard-level A, B and C pressure equipment must be item-registered, and registration generally requires a safe-to-operate statement from a competent person who has inspected it. As the owner you then have to keep the equipment inspected to AS/NZS 3788 and hold the records.
Speqo is Melbourne-based and mobile; the inspector travels for scoped work and shutdowns, serviced by arrangement. Speqo does that inspection to AS/NZS 3788 by a certified AICIP inspector, with a report that cites the governing clause so your records are audit-ready. Every job also leaves you with an interactive 3D model of the asset, findings pinned where they were found, and a free platform that keeps your equipment register, documents and due-date reminders in one place.
// Also serviced across New South Wales
- Wollongong & Illawarra
- Lithgow & the Central West
- the Riverina
Serviced Australia-wide by arrangement.
// Read next
Understand your obligations
- Do I need to register my pressure vessel?Whether you register pressure equipment, and how, depends on the state. And in most states, registration itself compels an inspection first.Read the guide
- How often does a pressure vessel need inspection?In-service inspection intervals come from AS/NZS 3788 and depend on the equipment. Here are the typical periods, and how they can be extended on a justified risk assessment.Read the guide
- AS 4343 hazard levels explainedAS 4343 gives every piece of pressure equipment a hazard level, and that level decides whether it needs statutory inspection. Here's what the levels mean.Read the guide
See the full service detail on the services page.
// Get started
Get a quote
Tell us about your equipment and we'll come back with a clear, scoped quote — including your complimentary 3D model. Prefer to talk? Reach Mathew Jardim directly.